- Impact resistant thermoset phenolic resin core
- Simple 'sheets & sticks' installation saves time & money
- Dense core provides ultimate panel flatness
- Available in Kynar 500®, metallics & anodized finishes
- Can be curved to form clean, graceful lines
Product Description
Panel 20® is a composite panel for exterior use made by laminating an aluminum
skin to a substrate of thermoset phenolic resin. A second aluminum skin is added
as a backer and provides thermal stability and panel balance. This system is
designed for use as exterior cladding on walls, canopies, fascias, and accent bands.
However, Panel 20® is also ideal for other applications where a high end look is desired.
Similar to Envelope2000®, Panel 20® is impact resistant, water resistant, and provides ultimate smoothness in a wide variety of finishes. However, Panel 20® is installed using a variety of moldings, saving on the fabrication and installation costs.
Installation Overview
Attached to the substrate with concealed screws, Panel 20® offers two piece aluminum moldings to complete the panel joints. These moldings (available in batten and reveal profiles) consist of a plastic receiver attached prior to the panel, then finished with a prepainted cover to match or complement the panel. In addition to perimeter fastening, Panel 20® should be adhered to the substrate in the field of the panel.
Installation is non-progressive when using these moldings allowing panels to be removed and replaced should damage occur.
Composition and Materials
|
Component |
Standard (in) |
Metric (mm) |
|
. Prefinished
Smooth Aluminum Face |
.024" |
.609mm |
Panel Weight and Thickness
|
Property |
Standard (in) |
Metric (mm) |
|
. Panel
Weight |
1.29 lbs/ft² |
6.30 kg/m² |
Sizes Available
|
4' x 8' |
48" x 96" |
(1219mm x 2438mm) |
Information provided courtesy of Citadel Architectural Products.